|
Num Posts
Sort Order
|
|
Posted: 04/13/08
08:24 PM
|
|
Whats the easiest way to obtain 500 hp from a 3rd gen cummins?
2004 Dodge Cummins Quad Cab,Rolling Big Power Tuner, 4 inch straight exhaust, BD Adjustable Wastegate, K&N cold Air Intake, 35 inch BFGs, 17x9 inch Mickey Thompson Wheels
"Member of the Blowin' Smoke Gang"
|
|
Posted: 04/13/08
08:32 PM
|
|
stack chips, exhaust, intake, turbo, water injection, injectors. that should be enough. i assume you are referring to a 1998.5-2002 24 valve no the '04 you have listed
1996 Ram 2500 reg. cab longbox, #6 plate, 191 Deliver valves, 60 hp injectors, star wheel turned up a lot, AFE Stage 2 intake into a Phat Shaft 62 wastgate set at 40 psi, 4" straight pipe, Auto Meter Gauges, ATS tranny and TC (unfortunately), Dick Cepek FC-II A/T 265 LR16 (good tires). FS-2500 Bypass Filter. The only hands that work on my truck are my own.
Member - Blowin' Smoke Gang
|
|
Posted: 04/14/08
04:57 AM
|
|
or you can just copy a setup from a proven truck, maybe one from the pages of this magazine. but like black smoker said, its all about the air/fuel you can stuff into it. personally, heres what id do if i had the money
150 horse injectors(or more)
hotrod vp 44 injection pump(or dual CP3s on an 04)
S&B cold air intake
CFM+ intake
banks aftermarket intercooler
edge drag comp stacked with maybe a predator or simliar program
Snow performace Stage 3 water methanol
BD super twin turbos or a custom set up
head studs, fire ringed, ported and polished heads, etc
of course then theres the little stuff like lift pump, turbo boots, etc that would be required. with this setup, my guess is you should easily hit 500 horses if not exceed that mark
1999 Dodge Ram 2500 4x4 Cummins 24 valve, 5spd with south bend 550hp+ clutch, 150 horse injectors, Fram Boost intake(for now), Edge Juice with attitude, 150 gph fass fuel pump and much more, all together 450 dyno proven HP and 1170 ft lbs.
DPMAG May Ride of the Month
and a quote from Dmax007- this site is entirely the blind leading the blind. nobody on this site has the balls to stand up to this stupid blowin smoke gang. got news for you, i do.
Recruiter/member of the Blowing Smoke Gang!
|
|
|
|
Posted: 04/14/08
11:04 AM
|
|
thanks for the info
2004 Dodge Cummins Quad Cab,Rolling Big Power Tuner, 4 inch straight exhaust, BD Adjustable Wastegate, K&N cold Air Intake, 35 inch BFGs, 17x9 inch Mickey Thompson Wheels
"Member of the Blowin' Smoke Gang"
|
|
Posted: 04/14/08
02:35 PM
|
|
no problem man, as you can tell, ive had my dream plans for awhile, lol
1999 Dodge Ram 2500 4x4 Cummins 24 valve, 5spd with south bend 550hp+ clutch, 150 horse injectors, Fram Boost intake(for now), Edge Juice with attitude, 150 gph fass fuel pump and much more, all together 450 dyno proven HP and 1170 ft lbs.
DPMAG May Ride of the Month
and a quote from Dmax007- this site is entirely the blind leading the blind. nobody on this site has the balls to stand up to this stupid blowin smoke gang. got news for you, i do.
Recruiter/member of the Blowing Smoke Gang!
|
|
Posted: 04/14/08
04:16 PM
|
|
i was thinking of just some injectors a turbo and a new cp3 pump a valve body upgrade and a convertor ill be good LOL
2004 Dodge Cummins Quad Cab,Rolling Big Power Tuner, 4 inch straight exhaust, BD Adjustable Wastegate, K&N cold Air Intake, 35 inch BFGs, 17x9 inch Mickey Thompson Wheels
"Member of the Blowin' Smoke Gang"
|
|
Posted: 04/14/08
04:16 PM
|
|
i havent got it dynoed but the mods i have on it now im guessing total rwhp is not too shy from 400 HP just dont know i should take it and get it dynoed
2004 Dodge Cummins Quad Cab,Rolling Big Power Tuner, 4 inch straight exhaust, BD Adjustable Wastegate, K&N cold Air Intake, 35 inch BFGs, 17x9 inch Mickey Thompson Wheels
"Member of the Blowin' Smoke Gang"
|