|
Num Posts
Sort Order
|
|
Posted: 09/12/08
07:44 PM
|
|
![]() i am looking to get a programmer for a 2000 dodge 24v. whats the best?
|
|
Posted: 09/12/08
07:49 PM
|
|
Smarty, nuff said ![]()
http://www.madselectronics.com/
Let the good coal roll
Warning !!!! I have an opinion and I am not afraid to use it !!!!!!
|
|
Posted: 09/12/08
08:10 PM
|
|
The two best bets for the truck you have are the Quad adrenaline which is 180hp 11 levels or the smarty but use caution as far as the trans, intake, and exhaust goes. Check out this site it might help www.smokingthecometition.com
|
|
|
|
Posted: 09/13/08
02:23 PM
|
|
If you will program, use the smarty. Other chips will cause your truck to run warmer than the smarty. Not only that there are many parameters you can modify. Also if you are programming, then other upgrades such as a TC if you're an automatic and a valve body are the first to tranny upgrades. Other wise you will toast it. Guages too are good so you can monitor everything
5.9 2007 Cummins. 250shot nitrous (3 stage system) Wastegated 5000 with PDI manifold, Snow Water meth, Pro Sportsman Valve Spring, Banks Intercooler with tubing, Banks Elbow, Smarty TNT-R, F1 150hp Flux injectors, Floor It Diesels Stage III Modified CP3 AirDog 150/150, 5 inch exhaust, S&B intake, Goerend Input Output Shafts and clutches, BD Flex plate, Converter and Valve Body. 4 1/2 inch Fabtec Lift with 33" tires dressed with DC1 Dick Cepek 20" rims
674.05HP #2 only
|
JEFFC
New User
| Posts: 1
| Joined: 09/08
Posted: 09/16/08
04:42 PM
|
|
i have 06 5.9 and need to stack module with tripledog what to give best results
|
|
Posted: 09/21/08
01:48 PM
|
|
Well that Bully dog already does timing so if you're running crazy larry then don't stack it. Your engine will start to detonate and it will melt the motor and I think that would be bad, haha. Friend of mine did that with an edge and it shut his engine down like three times. However, if I was you sell that and get a smarty you can select timing or no timing, it's a GREAT module, and it's not detectable on the ECM
5.9 2007 Cummins. 250shot nitrous (3 stage system) Wastegated 5000 with PDI manifold, Snow Water meth, Pro Sportsman Valve Spring, Banks Intercooler with tubing, Banks Elbow, Smarty TNT-R, F1 150hp Flux injectors, Floor It Diesels Stage III Modified CP3 AirDog 150/150, 5 inch exhaust, S&B intake, Goerend Input Output Shafts and clutches, BD Flex plate, Converter and Valve Body. 4 1/2 inch Fabtec Lift with 33" tires dressed with DC1 Dick Cepek 20" rims
674.05HP #2 only
|