|
Num Posts
Sort Order
|
azcummins
New User
| Posts: 10
| Joined: 07/08
Posted: 07/08/08
08:57 PM
|
|
if anybody knows how to increase the fueling rate on a c8.3 or of any places that sell hi po parts that would be awsome
|
|
Posted: 07/08/08
09:14 PM
|
|
All the same pump tricks that work on a 5.9 Cummins should work on a 8.3, injectors, delivery valves, fuel plate, etc. You might try Peak Diesel Performance, I think Piers has messed with them in the past.
1989 Dodge D250 "Project Rust Bucket" DDP4 injectors, 3200rpm spring, DDP Fuel Pin, Goerend Converter, J&H Performance 727 trans, BHAF, 4-inch exhaust 301/628. 9.6@73mph in the 1/8th
|
|
Posted: 07/13/08
08:03 AM
|
|
To correct a little. the pump parts interchange, but injectors are different. Ebay has some 40hp injectors usually. Be really careful if hot rodding a motorhome, they have limited cooling. Watch that pyro!
project rig: 99 Super Duty F250 2WD, DT466/ AT545 swap in the works.
My low buck fuel rate site:
www.freewebs.com/nevrenufhp/index.htm
|
|
|
esanchez
Administrator
| Posts: 1696
| Joined: 07/06
Posted: 07/14/08
02:16 PM
|
|
I know there are a lot of guys on here that don't like them, but Banks has a lot of parts for the 8.3. You might want to check them out.
|
CATman23
New User
| Posts: 9
| Joined: 07/07
Posted: 10/15/08
04:24 PM
|
|
Hey azcummins in phoenix there is a place called diesel preformance center, they can tweak the pump for you and do anyother stuff like injectors, ect. They are really cool guys and decent prices.
|