Smoke!!

2001 Ram Cummins 24V (stock)

Just wondering if there is an additive I can put in with the fuel to make smoke without having to change injectors, pump, and / or other parts on my engine?  Only way mine will smoke at all is if I really put my foot it....and then it only puts out a little.  

Nope.  
--------------------


1989 Dodge D250 "Project Rust Bucket" 14mm Scheid VE pump, 5x25s, 47RH by J&H Performance, 62mm S300, dual wastegates, ARP studs, o-ringed head, NX two stage, 972rwhp on two guns.

1995 Dodge 4x4 "Project Triple Threat" Goerend Trans, Secret squirrel stuff by Garmon's 433/842

Cover half your air filter with a plastic bag. Or run used motor oil in place of the diesel.  
Logan
1995 12 valve Cummins 6.0L, 5 speed, 4x4, 600hp Valair Clutch. Air Dog 150, no fuel plate, benched pump, SDX 5x.014 injectors, Hamilton 181/210 cam and HD pushrods, Stage 2 Port job, 5 angle valve job, 60lb valve springs, ARP studs, O-ringed head, .020" head gasket, coated pistons, balanced bottom end, Fluidampr, PDI exhaust manifold, homemade intake manifold, HE351cw w/ 50mm wastegate over S475. 505hp 1156 ft/lbs pre-build

Maybe you should ask on CompetitionDiesel.com...  

Rig up a sand-injection system.  

Got lots of used motor oil around, so think I'll filter and refilter and clean it all up real good and add it a gallon or 2 atta time to my tank with a tankfull of diezel and see what that does.  I have used motor oil/trans oil in the past on occasion with no problems.  

You haven't noticed the drastically increased pollution from your vehicle, or the fact its completely illegal, or the fact engine oil is not a fuel and its designed not to burn?